Homework answers / question archive / Only need this part of Subnetting, IP Addressing, VLANs,Trunk configuration and Routing Steps for Subnetting and IP Addressing: 1

Only need this part of Subnetting, IP Addressing, VLANs,Trunk configuration and Routing Steps for Subnetting and IP Addressing: 1

Unrecognized

Share With

Only need this part of Subnetting, IP Addressing, VLANs,Trunk configuration and Routing Steps for Subnetting and IP Addressing: 1. Analyze Requirements: o Review the number of hosts needed for each subnet from the assignment. 2. Create VLSM Plan: o Divide the given network block into subnets using VLSM, minimizing IP wastage. o Fill out the IP addressing table with subnet details (size, mask, first/last usable IP, broadcast address). 3. Verify and Share: o Double-check calculations and share the plan with the team. o Steps for VLAN and Routing Configuration: 1. VLAN Configuration: o Assign VLANs to different departments and secure switch ports. o Use Packet Tracer to configure VLANs and test inter-VLAN communication. 2. Routing Protocol Setup: o Choose an appropriate routing protocol (e.g., OSPF or EIGRP) and configure it in Packet Tracer. o Test routing functionality to ensure proper communication between locations. 3. Capture Screenshots: o Document configuration steps with labeled screenshots and include explanations.