Homework answers / question archive / have titled my project 'Battery Charger Monitoring and Alarm Interface Module for Distribution Substations' Components given: 4-way drip switch, five 10000 ohm resistors, three 740 ohm resistors, two 220 ohm resistors, two 1000 ohm resistors, 1 green LED and 1 Red LED, two capacitors (103 ceramic disc), 9V battery, two NPN transistors, LM7805 Voltage Regulator, DS18B20 temperature sensor, LCD Wires Final demonstration lookouts: Do all four alarm inputs work correctly and displaying the alarm type on the Display Do both outputs work, the alarm output (RED LED) when the dip switch is used to simulate the battery charger alarms Fan control simulated with the GREEN LED when the temp goes above for example 30deg and switching off when going below 30deg

have titled my project 'Battery Charger Monitoring and Alarm Interface Module for Distribution Substations' Components given: 4-way drip switch, five 10000 ohm resistors, three 740 ohm resistors, two 220 ohm resistors, two 1000 ohm resistors, 1 green LED and 1 Red LED, two capacitors (103 ceramic disc), 9V battery, two NPN transistors, LM7805 Voltage Regulator, DS18B20 temperature sensor, LCD Wires Final demonstration lookouts: Do all four alarm inputs work correctly and displaying the alarm type on the Display Do both outputs work, the alarm output (RED LED) when the dip switch is used to simulate the battery charger alarms Fan control simulated with the GREEN LED when the temp goes above for example 30deg and switching off when going below 30deg

Unrecognized

Share With

have titled my project 'Battery Charger Monitoring and Alarm Interface Module for Distribution Substations' Components given: 4-way drip switch, five 10000 ohm resistors, three 740 ohm resistors, two 220 ohm resistors, two 1000 ohm resistors, 1 green LED and 1 Red LED, two capacitors (103 ceramic disc), 9V battery, two NPN transistors, LM7805 Voltage Regulator, DS18B20 temperature sensor, LCD Wires Final demonstration lookouts: Do all four alarm inputs work correctly and displaying the alarm type on the Display Do both outputs work, the alarm output (RED LED) when the dip switch is used to simulate the battery charger alarms Fan control simulated with the GREEN LED when the temp goes above for example 30deg and switching off when going below 30deg. Voltage and temperature values shown on the display. Remember both output MUST use transistors to switch on and off the LED'S