Fill This Form To Receive Instant Help

Help in Homework
trustpilot ratings
google ratings


Homework answers / question archive / Engineering Science (ENGG 0001

Engineering Science (ENGG 0001

Electrical Engineering

Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP IN SEMESTER INDIVIDUAL ASSIGNMENT – 2 Module Code: ENGG 0001.1 Module Name: Engineering Science Level: 0 Max. Marks: 100 Instructions to Student ? ? ? ? ? ? Answer all questions. Show all steps of Answer. Replace “Z” with last two digits of your MEC ID Number. For instance, let your ID number is 20S12345, then the last two digits is 45. So Z = 45. Deadline of submission: 13/06/2021, 23:59 The marks received on the assignment will be scaled down to the actual weightage of the assignment which is 50 marks Formative feedback on the complete assignment draft will be provided if the draft is submitted at least 10 days before the final submission date. Feedback will be provided after the exam board. Module Learning Outcomes The student will achieve the following LOs by completing the assignment successfully 1) Explain the basics of thermodynamics 2) Distinguish the various magnetism and magnetic materials and give a qualitative description of superconductors and its applications 3) Describe the nanoparticles and recall its properties and applications 4) Explain the basics of Non-destructive testing techniques Assignment Objective To assess learning emphasized on basic concepts of physics, problem solving skills and the ability to apply this knowledge in Engineering. Assignment Tasks Question 1: a. A (? + 950) ? iron block heats in stamping when subjected to a stroke by a hammer of mass (? + 450) ??; the velocity of the hammer at the instant of hit is 10 m/s, and 55% of the hammer energy is used up in the heating of steel. Find the rise in the temperature of the block. Consider the specific heat of iron block is 444 J/kg. K. MEC_AMO_TEM_034_01 (10 Marks) Page 1 of 8 Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP b. A Carnot engine takes (? + 100) ??? of heat from the source at temperature (? + 400) K and gives up (? + 80) ??? to the sink. Find the temperature of sink and the thermal efficiency of the engine. (10 Marks) Question 2: a. A Carnot engine absorbs the heat energy of (? + 500) kcal from a heat reservoir at (? + 545)°C and exhausts the heat to sink at (? + 35)°C. Find the work done by the engine. (10 Marks) b. Two steam engines are operated in series. The first engine absorbs heat from the hot reservoir at (? + 430) °? and later sends it to the exhaust at (? + 230) °?. The second engine absorbs the heat from the exhaust of first engine and sends the unused heat to exhaust at (? + 130) °?. Using these data, find the maximum thermal efficiency for each engine. (10 Marks) Question 3 a. Explain, in your words, the Dia, Para and Ferro magnetic materials with examples. Also explain why Diamagnets have weak magnetic fields compared with other types. (12 Marks) b. Define Superconductor and discuss any three of its applications, in your own words. (8 Marks) Question 4: a. Define nanomaterials. In your own words, discuss any three advantages and disadvantages of nanomaterials. (10 Marks) b. What are carbon nanotubes (CNTs)? List any two applications of CNTs in Mechanical Engineering and in Civil Engineering, in your own words. (10 Marks) Question 5: a. In your own words, discuss the feature, principle and two applications of the Thermography method. (7.5 Marks) MEC_AMO_TEM_034_01 Page 2 of 8 Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP b. Two cracks were observed in an aluminium rod of 152 mm diameter through the ultrasonic testing, as shown in figure below. If the echoes from these cracks are observed at time of (? + 5) μs and (? + 41) μs, respectively, find the distance between the cracks. Consider the velocity of ultrasound in aluminium is 6018 m/s. (12.5 Marks) Rules & Regulations: ? ? ? ? ? ? ? Answers to the questions should be based on the methods taught that covers the intended Learning Outcome of the Module. All resources should be cited using CU Harvard style. The final assignment must have a Title page, Table of Contents, References/ bibliography using CU Harvard Style and page numbers. Title Page must have Assignment Name, Module name, Session, your name, ID, and the name of the faculty. Softcopy in word format is to be submitted through Turnitin link on MEC Learn. Submission of Assignment with answers in Image format/hand written will not be accepted. Viva will be conducted after the assignment submission as per the dates informed earlier. Guidelines: ? Assignment must be computer typed. ? Font - Times New Roman ? Font – Style - Regular ? Font - Size - 12 ? Heading should be with Font Size 14, Bold, Capital and Underline. MEC_AMO_TEM_034_01 Page 3 of 8 Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP ? ? ? Explain with suitable diagrams wherever required. Diagrams must be drawn using suitable software or by pencil. Each student has to do the assignment individually / Students have to do the assignment collaboratively and each student should write a brief reflection on their contribution and learnings from group work. You can refer books in eLibrary or use internet resource. But you should not cut and paste material from internet nor provide photocopied material from books. The assignment answers should be in your own words after understanding the matter from the above resources. Important Policies to be followed 1. Student Academic Integrity Policy*: MEC upholds the spirit of academic integrity in all forms of academic work and any form of violation of academic integrity shall invite severe penalty. Any benefit obtained by indulging in the act of violation of academic integrity shall be cancelled. All cases of violation of academic integrity on the part of the student shall fall under any of the below mentioned categories: 1. Plagiarism 2. Malpractice 3. Ghost Writing 4. Collusion 5. Other cases If the student fails a module and has a proven case of academic integrity violation in this module, the student is required to re-register the module. This is applicable to first and second offenders of plagiarism. 1. Plagiarism A. First offence of plagiarism I. If a student is caught first time in an act of plagiarism during his/her course of study in any assignment other than project work, the student will be allowed to re-submit the assignment once, within a maximum period of one week. However, a penalty of deduction of 25% of the marks obtained for the resubmitted work will be imposed. II. Period of re-submission: The student will have to re-submit the work one week from the date he or she is advised to re-submit. III. If the re-submitted work is also found to be plagiarized, then that assessment will be awarded a zero mark. Re-submission of the work beyond the maximum period of one week will not be accepted and the assessment will be awarded a zero mark. MEC_AMO_TEM_034_01 Page 4 of 8 Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP B. Second offence of plagiarism If any student is caught second time in an act of plagiarism during his/her course of study (in a subsequent semester), the student will directly be awarded zero for the work in which plagiarism is detected. In such cases, the student will not be allowed to resubmit the work. A warning of suspension shall be issued, and student has to sign an undertaking and undergo counselling session in such cases. 2. Malpractice/Ghostwriting/Collusion A. First offence of Malpractice/Ghostwriting/Collusion If a student is caught in an act of Malpractice/Ghostwriting/Collusion for an assessment component irrespective of coursework or end semester, the student shall fail the module and shall be required to re-register the module B. Second Offence of Malpractice/Ghostwriting/Collusion If a student is caught a second time in an act of Malpractice/Ghostwriting/Collusion for an assessment component irrespective of coursework or end semester, the student shall fail the module. A warning of suspension shall be issued, and student has to sign an undertaking and undergo counselling session in such cases. 3. Third Offence of Academic Integrity Violation If a student is caught a third time in an act of Academic Integrity Violation for an assessment component irrespective of coursework or end semester (in a subsequent semester), the student shall fail the module and also shall be suspended for one semester from the College, as recommended by institutional level academic committee, Chaired by the Associate Dean, Academic Affairs. 4. Fourth Offence of Academic Integrity Violation: If a student is caught a fourth time in an act of Academic Integrity Violation for an assessment component irrespective of coursework or end semester (in a subsequent semester), the student shall fail the module and also shall be expelled from the College, as recommended by institutional level academic committee, Chaired by the Associate Dean, Academic Affairs. 5. Other cases If a student commits an act of academic integrity violation as per the definition of “other cases” mentioned in the previous section or of a different nature, student’s case shall be forwarded to an institutional level academic committee, Chaired by the Associate Dean, Academic Affairs. The committee shall investigate the case by means of a viva and/or a disciplinary hearing and shall take appropriate decision. The penalty that can be granted to a proven case of academic integrity violation which falls in this category of “other cases” can be a warning/component zero/ module fail/suspension/expulsion depending on the nature and gravity of the offence. MEC_AMO_TEM_034_01 Page 5 of 8 Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP 6. Types/Variations of Cases: I. II. III. IV. If plagiarism is detected in any component of one assessment, the deduction in marks will be applicable for the whole assessment, even if only the component or part submission alone needs to be resubmitted. If plagiarism is detected in a group assessment, all students of the group will be considered as having committed an act of plagiarism and the policy will then be applied to all students If plagiarism is detected in any component of a group assessment, the deduction in marks will be applicable for the whole assessment even if only the component or part submission alone needs to be resubmitted. All students of the group would be considered as having committed an act of plagiarism and the policy will then be applied to all the students of the group. If the assessment consists of components or part submissions that could be a group assessment component (e.g. group assignment) and an individual assessment component (e.g. individual reflection), the following will be applicable: a. If plagiarism is detected in the group assessment component, all students of the group will be considered as having committed an act of plagiarism, The policy will then be applied to all students of the group. Group assessment component will be resubmitted as per the policy. b. If plagiarism is detected in the individual assessment component, the individual assessment component will be resubmitted and the policy will then be applied to that student alone. c. For both (a) and/or (b), the deduction in marks will be applicable for the whole assessment. * for further details Refer to MEC Student Academic Integrity Policy in Student Handbook. 2. Late Submission Regulations: It is the students’ responsibility to check all relevant timelines related to assessments. As per the Assessment Policy at MEC, late submissions are allowed for one week (5 working days) for all UG modules with a penalty. In such cases, a deduction of 5% of the marks obtained for the submitted work shall be imposed for each working day following the last date of submission till the date of actual submission. Assessment documents submitted beyond a period of one week (5 working days) after the last date of submission will not be accepted and will be awarded a zero for that assessment. In cases where the submission has been delayed due to extenuating circumstances, the student may be permitted to submit the work without imposing the late submission policy stated above. The extended period of submission will be one week from the original last date of submission. In such cases, the student is expected to submit the supporting certificates on or before the original last date of submission of the assessment and the decision of extension rests with faculty responsible for the assessment .The late submission policy shall be applied if the student fails to submit the work within one week of the original last date of submission. MEC_AMO_TEM_034_01 Page 6 of 8 Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP Students may contact their teachers for clarification on specific details of the submission time if required. 3. Research Ethics and Biosafety Policy To protect and respect the rights, dignity, health, safety, and privacy of research subjects involved including the welfare of animals and the integrity of environment, all student projects are expected to be undertaken as per the MEC Research Ethics and Biosafety Policy. Accordingly the following shall apply. ? Research and other enterprise activities shall be conducted by maintaining the high ethical standards consistent with national and international standards and conventions. ? Any research at MEC that is categorized as high-risk research shall be subject to review and approval by the Research Ethics and Biosafety Committee. ? Research activities involving collection of human or animal tissues and manipulation of microbial, animal or plant cells shall be subject to review and approval by the Research Ethics and Biosafety Committee. ? Participants involved in research must be informed about the purpose of research and intended uses of research findings. Written consent must be obtained from people involved prior to the commencement of research. ? Data obtained from participants must be treated with high confidence and should be used only for the intended purpose of research. Assessment Evaluation Criteria Classification And % Range Outstanding Excellent Very Good Quality MEC_AMO_TEM_034_01 Reflection and critical analysis. Highly competent analytical skills and reflective practice, demonstrating personal learning and growth, insight into required professional values and principles and professional development planning. Strong analytical skills and reflective practice used, demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. Good use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and Knowledge and Understanding/ Application of Theory Extensive knowledge and depth of understanding of principles and concepts and /or outstanding application of theory in practice. Evidence of Reading Referencing and Bibliography Presentation, Grammar and Spelling Evidence of reading an extensive range of educational literature/research and where applicable workplace strategies, policies and procedures. Accurate referencing and bibliography correctly using appropriate referencing style Excellent presentation, logically structured, using correct grammar and spelling, excellent crossreferencing and links to supporting evidence Excellent knowledge and understanding of principles and concepts and /or excellent knowledge and understanding of the application of theory in practice Evidence of reading a wide range of educational literature/research and where applicable, workplace strategies, policies and procedures. Appropriate referencing and bibliography correctly using appropriate referencing style Good presentation, competently structured, using correct grammar and spelling, clear and easy to use links to supporting evidence Good knowledge or key principles and concepts and/or good knowledge of the application of theory in practice Evidence of reading a good range of educational literature/research and where applicable workplace strategies, policies and procedures. Generally well referenced with correct use of the appropriate referencing style Reasonable presentation, completely structured, acceptable grammar and spelling, acceptable links to supporting evidence Page 7 of 8 Engineering Science (ENGG 0001.1) – Spring - 2021 – CW (Assignment-2) – ALL – QP Good (Acceptable) Adequate/ Satisfactory Weak /Poor (all learning outcomes not adequately met) MEC_AMO_TEM_034_01 professional development planning. Acceptable use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. Adequate use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. Little use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required competencies and/or professional development planning. Professional values and principles not reflected in the submission. and/or Insufficient/no use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required competencies and professional development planning Acceptable knowledge of key principles and concepts and/or knowledge of the application of theory in practice Evidence of reading an appropriate range of educational literature/research and where applicable, relevant workplace policies and procedures Adequate referencing. Generally accurate use of appropriate referencing style Adequate presentation and structure, acceptable grammar and spelling, adequate links to supporting evidence Adequate knowledge of key principles and concepts and/or satisfactory evidence of the application of theory in practice. Evidence of minimal reading of educational literature/research and where applicable relevant workplace policies and procedures Adequate referencing. Appropriate referencing style used but may contain some inaccuracies. Weak presentation , satisfactory structure, grammar and spelling, links to supporting evidence Little evidence of knowledge of key principles or concepts and/or little evidence of the application of theory in practice Little or no evidence of reading outside of the course textbook and/or reference to relevant work place policies and procedures Little or no referencing, incorrect style, or very inaccurate use of appropriate referencing style Poor presentation, grammar and spelling, links to supporting evidence and/or and/or No evidence of knowledge of key principles or concepts and/or no evidence of application of theory in practice No evidence of reading outside of the course textbook and/or reference to relevant workplace policies and procedures and/or Unacceptable presentation, grammar and spelling, structure is very poor, links to supporting evidence

Option 1

Low Cost Option
Download this past answer in few clicks

16.89 USD

PURCHASE SOLUTION

Already member?


Option 2

Custom new solution created by our subject matter experts

GET A QUOTE