Homework answers / question archive / Grader - Instructions Access 2019 Project GO19_AC_CH03_GRADER_3F_HW - Degrees and Students 1

Grader - Instructions Access 2019 Project GO19_AC_CH03_GRADER_3F_HW - Degrees and Students 1

Computer Science

Share With

Grader - Instructions Access 2019 Project GO19_AC_CH03_GRADER_3F_HW - Degrees and Students 1.0 Project Description: In this project, you will use a database to track degrees and grade point averages for honor students in the health professions program in preparation for graduation. You will create reports, modify a report in Layout view and Design view, group data in a report, and keep grouped data together for a printed report. Steps to Perform: Points Possible Step Instructions 1 Start Access. Open the file Students_Access_3F_Degrees.accdb downloaded with this project, and then enable the content. View the relationship between the 3F Degrees table and the 3F Students table. One type of degree can be awarded to many students. Close the Relationships window. 0 2 Use the Report tool to create a report based on the 3F Summa Cum Laude Graduates Query object. 10 3 With the report displayed in Layout view, apply the Facet theme to only the report. Delete the Student ID field from the report. Change the width of the Last Name, First Name, and Degree text box controls to 1.25 inches. 10 4 With the report displayed in Layout view, sort the records in ascending order by the Last Name field. Change the width of the Program text box controls to 2.5 inches. 4 5 At the bottom of the report and in Layout view, change the height of the calculated control that displays 8 to 0.25 inch. For the page number control, set the Left property to 5 inches. 4 6 With the report displayed in Layout view, select the title of the report and change the font size to 14. In the title, change the word Query to Report. In the body of the report, for the GPA field name, set the Left property to 0.25 inch (the GPA text box controls move to the right, and all of the other fields also move to the right). Save the report as 3F Summa Cum Laude Graduates Report, close the Property Sheet, and then close the report. 12 7 Use the Report Wizard to create a report based on the 3F GPAs by Degree Program Query object. Add the following fields (in this order) to the report: Program, GPA, Last Name, and First Name. View the data by 3F Degrees, and do not add any other grouping to the report. 14 8 Sort the records first in descending order by the GPA field and then in ascending order by the Last Name field. Summarize the report by averaging the GPA field. 6 9 Be sure the layout is Stepped and the orientation is Portrait. Name the report 3F GPAs by Program Report, and then finish the wizard. 6 10 Display the 3F GPAs by Program Report in Layout view. Apply the Wisp theme to this report only. Select the title of the report, change the font size to 16, and then apply bold. 6 11 With the 3F GPAs by Program Report displayed in Layout view, delete the controls that begin with Summary for 'Program'. Change the width of the Program text box controls to 2.75 inches. 4 12 With the 3F GPAs by Program Report displayed in Layout view, change the text in the label control that displays Avg to Average GPA by Program. At the top of the report, apply bold formatting to the four label controls that display the field names. 6 Created On: 07/05/2019 1 GO19_AC_CH03_GRADER_3F_HW - Degrees and Students 1.0 Grader - Instructions Access 2019 Project Points Possible Step Instructions 13 With the 3F GPAs by Program Report displayed in Layout view, select the GPA label control, the GPA text box controls, and the calculated controls for the average GPA. Change the width of the selected controls to 1 inch, and set the Left property to 3 inches. Close the Property Sheet. 6 14 Display the 3F GPAs by Program Report in Design view. Select the following two controls: the Program text box control (in the Program Header section) and the Average GPA by Program label control (in the Program Footer section). Align the right edges of the two selected controls. Save the report. 4 15 Display the 3F GPAs by Program Report in Print Preview as two pages, and notice how the groupings break across the pages. Display the report in Layout view, and then open the Group, Sort, and Total pane. Set the grouping option so that each group of program records is kept together on one page when the report is printed, and then close the Group, Sort, and Total pane. Display the report in Print Preview, and notice that the groupings are not split between pages. Save the report, and then close the report. 8 16 If necessary, close all database objects and open the Navigation Pane. Save and close the database, and then submit for grading. 0 Total Points Created On: 07/05/2019 2 100 GO19_AC_CH03_GRADER_3F_HW - Degrees and Students 1.0 3 With the report displayed in Layout view, apply the Facet theme to only the report. Delete the Student ID field from the report. Change the width of the Last Name, First Name, and Degree text box controls to 1.25 inches. Σ 1 10 For the '3F Summa Cum Laude Graduates Report', the width of LastName field was not set to '1.25'. 0 1 For the '3F Summa Cum Laude Graduates Report', the width of First Name field was not set to '1.25'. 0 1 For the '3F Summa Cum Laude Graduates Report', the width of Degree field was not set to '1.25'. 0 1 For the '3F Summa Cum Laude Graduates Report', the theme was not set to 'Facet'. 0 0 6 Other action(s) in this instruction were performed and scored correctly. 1 1 4 With the report displayed in Layout view, sort the records in ascending order by the Last Name field. Change the width of the Program text box controls to 2.5 inches. 4 4. 11 With the 3F GPAs by Program Report displayed in Layout view, delete the controls that begin with Summary for 'Program'. Change the width of the Program text box controls to 2.75 inches. Σ 2 4 The width of the Program text box control of the '3F GPAs by Program Report' was not set to '2.75'. 0 0 2 12 With the 3F GPAs by Program Report displayed in Layout view, change the text in the label control that displays Avg to Average GPA by Program. At the top of the report, apply bold formatting to the four label controls that display the field names. N 6 The label control that displays Avg was not changed to 'Average GPA by Program' of '3F GPAs by Program Report'. 0 0 4 14 Display the 3F GPAs by Program Report in Design view. Select the following two controls: the Program text box control in the Program Header section) and the Average GPA by Program label control in the Program Footer section). Align the right edges of the two selected controls. Save the report. < 2 The Average GPA by Program label control of '3F GPAs by Program Report' was not aligned right correctly. o 0 2 15 Display the 3F GPAs by Program Report in Print Preview as two pages, and notice how the groupings break across the pages. Display the report in Layout view, and then open the Group, Sort, and Total pane. Set the grouping option so that each group of program records is kept together on one page when the report is printed, and then close the Group, Sort, and Total pane. Display the report in Print Preview, and notice that the groupings are not split between pages. Save the report, and then close the report. 0 8 In '3F GPAs by Program Report', the grouping option was not set to 'keep whole group together on one page'. o 0 8 10 Display the 3F GPAs by Program Report in Layout view. Apply the Wisp theme to this report only. Select the title of the report, change the font size to 16, and then apply bold. 3 6 For the '3F GPAs by Program Report', the theme was not set to 'Wisp'. 0 0 3 Other action(s) in this instruction were performed and scored correctly. 3 3 11 With the 3F GPAs by Program Report displayed in Layout view, delete the controls that begin with Summary for 'Program'. Change the width of the Program text box controls to 2.75 inches. 2 4. The width of the Program text box control of the '3F GPAs by Program Report' was not set to '2.75' 0 2 15 Display the 3F GPAs by Program Report in Print Preview as two pages, and notice how the groupings break across the pages. Display the report in Layout view, and then open the Group, Sort, and Total pane. Set the grouping option so that each group of program records is kept together on one page when the report is printed, and then close the Group, Sort, and Total pane. Display the report in Print Preview, and notice that the groupings are not split between pages. Save the report, and then close the report. 0 8 In '3F GPAs by Program Report', the grouping option was not set to 'keep whole group together on one page'. o 8 10 Display the 3F GPAs by Program Report in Layout view. Apply the Wisp theme to this report only. Select the title of the report, change the font size to 16, and then apply bold. 3 6 For the '3F GPAs by Program Report', the theme was not set to 'Wisp'. 0 0 3 11 With the 3F GPAs by Program Report displayed in Layout view, delete the controls that begin with Summary for 'Program'. Change the width of the Program text box controls to 2.75 inches. 2 4 The width of the Program text box control of the '3F GPAs by Program Report' was not set to '2.75' 0 2 15 Display the 3F GPAs by Program Report in Print Preview as two pages, and notice how the groupings break across the pages. Display the report in Layout view, and then open the Group, Sort, and Total pane. Set the grouping option so that each group of program records is kept together on one page when the report is printed, and then close the Group, Sort, and Total pane. Display the report in Print Preview, and notice that the groupings are not split between pages. Save the report, and then close the report. 0 8 In '3F GPAs by Program Report', the grouping option was not set to 'keep whole group together on one page'. o 0 8 10 Display the 3F GPAs by Program Report in Layout view. Apply the Wisp theme to this report only. Select the title of the report, change the font size to 16, and then apply bold. 3 6 For the '3F GPAs by Program Report', the theme was not set to 'Wisp'. o 0 3 15 Display the 3F GPAs by Program Report in Print Preview as two pages, and notice how the groupings break across the pages. Display the report in Layout view, and then open the Group, Sort, and Total pane. Set the grouping option so that each group of program records is kept together on one page when the report is printed, and then close the Group, Sort, and Total pane. Display the report in Print Preview, and notice that the groupings are not split between pages. Save the report, and then close the report. 0 8 In '3F GPAs by Program Report', the grouping option was not set to 'keep whole group together on one page'.