Fill This Form To Receive Instant Help

Help in Homework
trustpilot ratings
google ratings


Homework answers / question archive / Test Bank, Lesson 10 Configuring VPN and Routing Multiple Choice 1) Why are phone lines and ISDN not used today for remote access services (RAS)? a

Test Bank, Lesson 10 Configuring VPN and Routing Multiple Choice 1) Why are phone lines and ISDN not used today for remote access services (RAS)? a

Business

Test Bank, Lesson 10 Configuring VPN and Routing

Multiple Choice

1) Why are phone lines and ISDN not used today for remote access services (RAS)?

a. They’re too expensive.

b. They’re not secure enough.

c. They create dedicated access.

d. They no longer supply acceptable bandwidth.

 

 

2. What special hardware configuration should a RAS server have?

a. two network interface cards

b. a dedicated phone line

c. a dedicated Internet connection

d. secure access to the Internet

 

3. Why would you set Verify Caller ID on a remote dial-up connection for a user?

a. for enhanced security

b. because you don’t trust the user

c. because you want users to call in only from specific numbers

d. because it’s the default setting

 

4. What is the most efficient way to deploy VPN (virtual private network) configurations to hundreds of users?

a. Create and distribute a document that explains all the settings.

b. Create and distribute an executable file that contains all the settings.

c. Configure all the client systems manually.

d. Have the users bring in their systems individually for configuration.

 

 

5. When would you want to use a split tunnel for users?

a. if your users work only from the office

b. if your users might compromise security by browsing to insecure sites

c. if your users have laptop computers and work from home or office

d. if your users often need remote assistance

 

6. What term is defined as private data placed in a packet with a header containing routing information that allows the data to traverse a transit network, such as the Internet?

a. routing

b. VPN

c. encapsulation

d. tunneling

 

7. What is the result of enabling security on the RRAS interface in your RAS server?

a. You can’t connect to the Internet on that interface.

b. You can’t ping that interface.

c. You can’t provide network address translation (NAT) services to a local-area network.

d. You can’t use DHCP.

 

 

8. Why use a VPN for client-to-server connections over the Internet?

a. VPN traffic is protected by a firewall.

b. VPN traffic is encrypted.

c. VPN traffic goes undetected on the Internet.

d. VPN traffic is proxy-proof.

 

9. How is data verified when transferred through the Internet?

a. by cryptographic checksum

b. by RAS callback options

c. by correct firewall settings

d. by using PPTP for VPN connections

 

 

10. Of the four VPN tunneling protocols, which has the weakest encryption?

a. L2TP

b. IKEv2

c. SSTP

d. PPTP

 

 

11. Which authentication method is weakest (least secure)?

a. PAP

b. CHAP

c. MS-CHAPv2

d. EAP-MS-CHAPv2

 

12. Which authentication protocol allows you to change an expired password during the connection process?

a. PAP

b. CHAP

c. MS-CHAPv2

d. EAP-MS-CHAPv2

 

13. Which VPN protocol provides constant connectivity?

a. L2TP

b. IKEv2

c. SSTP

d. PPTP

 

14. When is it appropriate to use Windows Server 2012 as a router between two networks?

a. for heavy traffic on large networks

b. for heavy traffic on small networks

c. for light traffic on large networks

d. for light traffic on small networks

 

 

15. How are routing tables created dynamically?

a. through the use of RIP

b. with static routes

c. by using the routing table protocol (RTP)

d. by using a layer 2 switch

 

16. Which Windows Server 2012 R2 server role is used to install the Web Application proxy for AD FS?

a. AD FS

b. Remote Access

c. Remote Desktop

d. Web Services

 

 

17. In Windows Server 2012 R2, what is used as a reverse proxy?

a. Web Application proxy

b. Reverse Lookup

c. AD FS proxy

d. Reverse Web

 

 

Short Answer

 

18. By default, where are the RAS trace logs located?

 

19. What are the two ways to enable trace logging for RAS?

 

20. Briefly explain how network address translation (NAT) works.

 

21. What is the primary purpose or job of a router?

 

22. What three devices or systems can perform routing?

 

 

23. Before your DHCP server can provide IP addresses to clients, what do you have to define?

 

 

Best Answer

 

24. Setting up a NAT gateway is an excellent way to provide Internet access to a LAN. What is the best reason for setting up Internet access via NAT?

a. to allow multiple computers access to the Internet

b. to provide a type of firewall for a group of computers

c. to provide proxy services to a LAN

d. to use private IP addresses on the LAN

 

 

25. What is the first thing to check when troubleshooting VPN problems?

a. network connectivity

b. usernames and passwords

c. DNS lookups

d. firewall settings

 

26. For Dial-up RAS connectivity, what is the most secure setting to use?

a. deny access

b. a static IP address

c. verify caller ID

d. always call back to a particular number

 

 

Build List

 

27. Order the following steps required to configure dial-up remote access.

a. Right-click the server and select Configure and Enable Routing and Remote Access.

b. Select the interface to which you want to assign remote clients.

c. On the IP Address Assignment page, select either Automatically (to use a DHCP server to assign addresses) or From a specified range of addresses.

d. Fill in Start IP address and End IP address.

e. On the Remote Access page, select Dial-Up.

f. On the Configuration page, select Remote access (dial-up or VPN).

g. On the Address Range Assignment page, click New.

h. Choose Server Manager > Tools > Routing and Remote Access.

 

 

28. Order the following steps required to configure and enable VPN remote access.

a. Choose Server Manager > Tools > Routing and Remote Access.

b. On the VPN Connection page, select the external network card that is connected to the Internet.

c. Right-click the server and select Configure and Enable Routing and Remote Access.

d. On the IP Address Assignment page, click from a specified range of addresses.

e. On the Remote Access page, select VPN.

f. Fill in the Start IP address and End IP address.

 

29. Order the following steps required to set up a VPN connection from a client.

a. Connect to a workplace.

b. Set up a new connection.

c. Select Internet connection or Dial directly.

d. Choose Control Panel > Network and Internet.

e. Enter the name or IP address of the VPN server.

 

Repeated Answer

 

30. RRAS has multiple options from which you can select one or more services to provide to your users. Select the correct description for the Virtual private network (VPN) access and NAT option.

a. sets up the server to provide NAT services to clients on the private network that need to access the Internet

b. sets up a demand-dial or persistent connection between two private networks

c. sets up the server to support incoming VPN connections and to provide NAT services

d. sets up the server to accept incoming remote access connections (dial-up or VPN)

 

31. RRAS has multiple options from which you can select one or more services to provide to your users. Select the correct description for the Remote access (dial-up or VPN) option.

a. sets up the server to provide NAT services to clients on the private network that need to access the Internet

b. sets up a demand-dial or persistent connection between two private networks

c. sets up the server to support incoming VPN connections and to provide NAT services

d. sets up the server to accept incoming remote access connections (dial-up or VPN)

 

 

32. RRAS has multiple options from which you can select one or more services to provide your users. Select the correct description for the Secure connection between two private networks option.

a. sets up the server to provide NAT services to clients on the private network that need to access the Internet

b. sets up a demand-dial or persistent connection between two private networks

c. sets up the server to support incoming VPN connections and to provide NAT services

d. sets up the server to accept incoming remote access connections (dial-up or VPN)

 

 

33. RRAS has multiple options from which you can select one or more services to provide your users. Select the correct description for the Network Address Translation (NAT) option.

a. sets up the server to provide NAT services to clients on the private network that need to access the Internet

b. sets up a demand-dial or persistent connection between two private networks

c. sets up the server to support incoming VPN connections and to provide NAT services

d. sets up the server to accept incoming remote access connections (dial-up or VPN)

 

Option 1

Low Cost Option
Download this past answer in few clicks

8.87 USD

PURCHASE SOLUTION

Already member?


Option 2

Custom new solution created by our subject matter experts

GET A QUOTE

rated 5 stars

Purchased 7 times

Completion Status 100%

Sitejabber (5.0)

BBC (5.0)

Trustpilot (4.8)

Google (5.0)

Related Questions